Food processing and manufacturing scene floor construction

With the rapid development of the food industry, people pay more and more attention and value food safety. To eat and drink with peace of mind, food manufacturers must not only pay attention to the safety and health of raw materials and processing techniques, but also the construction of the production environment also requires the focus to meet complex and diverse functional needs.

In the food processing and manufacturing scenario, when selecting floor construction materials, it is necessary to ensure that it meets a number of rigorous performance requirements, including non -toxic and tasteless, excellent anti -permeability, corrosion resistance, abrasion resistance, high and low temperature, easy to clean And superior non -slip performance. As the preferred material in the food processing manufacturing industry, the Destrich hydrophilic polyurethane mortar perfectly fits these scene needs with its excellent performance and has become an ideal choice for the industry.

Destrich's water -based polyurethane mortar floor material performance and application
Performance advantage
0 "VOC" food -grade materials more than 10 kinds of organic acids, strong acids, and strong alkali tolerance
30 tons of heavy load capacity
30+ year of service life
1000+ Cases of projects in central kitchen and food workshop
30,000 square meters+cumulative construction area

Ensuring the quality of the floor is required to be in place

When constructing water -based polyurethane mortar, it should be carried out strictly in accordance with the construction requirements and processes to ensure that each link is properly handled to ensure the quality and effect of construction.

Precautions for the construction of Destrich's Hydrotinating Polyurethane Mortar Flooring Materials
Construction temperature requirements 01 The best construction temperature of water -based polyurethane mortar is between 5 ° C and 28 ° C. Excessive temperature will cause the bottom coating to foam and crack, and the too low temperature will affect the curing speed and strength. The construction of a high temperature environment at 40 ° C in summer can start with the temperature of the construction environment, and control the construction environment temperature of about 28 degrees. The temperature in winter is lower than 0 degrees, which is easy to freeze and the material strength and appearance effect are poor. It is recommended to raise the ambient temperature to construction above 10 ° C.

Clear the old floor, remove the loose structure, and provide rough, clean and solid grassroots. If the grassroots have a drum and cracking phenomenon, they need to be cut, cut, and repair.
After grinding the grassroots, clean up with industrial vacuum equipment. The ground cleaning standard is to wipe the ground with white gloves, and there is no obvious dust on the gloves.
For the new concrete grassroots, the cement label is above C25, and the concrete maintenance is more than 28 days. Keep their physical performance within the temperature range of -10 ℃ to 65 ℃.
No processing grassroots (including ground, wall, ditch, coffin, etc.) is prohibited, and water -based polyurethane mortar construction cannot be performed.

The cut anchor groove 03 anchor groove must be vertical and regular, the width and depth should reach 2 times the thickness of the floor, and the minimum should be 5 mm. The area around is not more than 25 square meters.
Pay attention to the edges of the wall, the sink, the door, etc., and the edges should be cut on the edge.

Material ratio and construction
Pay attention to the phenomenon of the moisture block when the ingredients are in the ingredients. Be sure to stir well according to the proportion of Dushili technicians. The mixed water -based polyurethane mortar material is fast to solidify, and it is recommended to be completed within 15 minutes at room temperature.
After the mortar is prepared, select the appropriate coating tool for construction. When applying, pay attention to master the thickness of the mortar. After the application, the mortar is enhanced. It can be compacted and painted.

Construction cooperation and maintenance
During the construction period and during the maintenance period, the control staff must be in and out. If the temperature is 10 ° C-15 ° C, the maintenance time is 24-48 hours.
After the construction is completed, the mortar needs to be maintained, and do not let it stress within a certain period of time. During the maintenance period, pay attention to the moisturizing, ventilation, etc. to ensure that the mortar can be completely dry.
The personnel configuration should be reasonable. According to the construction area and construction period, the professional construction personnel should be reasonably arranged. The materials such as ingredients, feeding, batch scraping, and bubbles should be closely cooperated.