Welcome to Shan Dong Des-Lead Advanced Materials Technology Industry Co., Ltd
Water-based Epoxy Top Coat
Drying time (top drying),h：≤8
Drying time (drying),h：≤48
Abrasion resistance (750g/500r), 8：≤0.050
The coating film has no cracks, no peeling falling
Classification:
Epoxy Floor
Key words:
Epoxy Floor
Product Overview
Aqueous epoxy flat topcoat is a coating with water-based epoxy resin, aqueous epoxy curing agent, distilled water, functional additives, aqueous color paste and fillers as the main components. The ratio is A:B = 3:1, where component A weighs 15 kg and component B weighs 5 kg.
Application Scenario
Widely used in industrial, commercial, educational and special environments. The industrial field includes factory workshops, warehouses, parking lots, etc., which need to be wear-resistant and heavy-load-resistant. Commercial places such as shopping malls, hospitals, etc. require beautiful and easy to clean. Educational places such as schools and kindergartens need to be safe and beautiful. Special environments such as dust-free workshops, food factories, etc. require clean and corrosion-resistant floors. Water-based epoxy floors are also suitable for basements, parking lots, etc., with waterproof and compressive resistance, simple construction, environmentally friendly and harmless. .
Performance indicators
| Serial number | Inspection items | Technical Requirements | Examination results | Conclusion of this item | ||
| 1 | Volatile organic compounds content (VOC),g/L | ≤120 | Not detected (Note 1) | Qualification | ||
| 2 | soluble gold-genus ( Limited color) | Lead (Pb),g/kg | ≤30 | Not detected (Note 2) | Qualification | |
| Cadmium (Cd),mg/kg | ≤30 | Not detected (Note 3) | Qualification | |||
| Chromium (Cr),mg/kg | ≤30 | Not detected (Note 4) | Qualification | |||
| Mercury (Hg),mg/kg | ≤10 | Not detected (Note 5) | Qualification | |||
| 3 | Status in container (Component A) | After stirring, it is uniform and has no hard lumps | After stirring, it is uniform, without lumps | Qualification | ||
| Status in container (Component B) | After stirring, it is uniform and has no hard lumps | After stirring, it is in a uniform state, no lumps | Qualification | |||
| 4 | Coated Appearance | The surface is flat and there are no obvious visible shrinkage, floating color, floral, wrinkle, pinholes, cracking and other phenomena | The surface is flat and there are no obvious shrinkage holes, floating color, floral, wrinkle, needle holes, cracking, etc. | Qualification | ||
| 5 | Drying time (top drying),h | ≤8 | 8 has been done | Qualification | ||
| Drying time (drying),h | ≤48 | 48 has been done | Qualification | |||
| 6 | Pencil hardness (abuse) | Agreed | 2H | One | ||
| 7 | Abrasion resistance (750g/500r), 8 | ≤0.050 | 0.030 | Qualification | ||
| 8 | Impact resistance (500g steel ball) | The coating film has no cracks, no peeling falling | The coating film has no cracks and no peeling | Qualification | ||
| 9 | Water resistance (168h) | No bubbles, no peeling, allow slight discoloration, and recover after 2 hours | No bubbles, not peeling, not changing color | Qualification | ||
| 10 | Alkaline resistance (20% NaOH solution, 72h) | Do not bubble, do not peel off. Allow slight discoloration | No bubbles, no thorns, no color change | Qualification | ||
| 11 | Elasticity | Flexibility,mm | Agreed | 1 | — | |
PRODUCTION BASE
The company is committed to product technological innovation and building new platforms to improve its capabilities. In order to continuously improve its core competitiveness in the market and meet new market demands, Des-Lead has established a research and development center. The company has more than 10 professional R&D teams in the fields of flooring, sports, waterproofing and anti-corrosion, and polyurea. It continues to research products that better meet market needs, pays attention to ecological construction, and actively tries environmental protection technology. It has maintained vigorous vitality and abundant market vitality in the fierce market changes and market competition.
PRODUCTION LINE
Des-Lead has its own independent production base and has established a world-leading fully automatic assembly line with a comprehensive daily output of 100 tons and an annual service site area of more than 10 million square meters. The strict quality management system ensures the quality and efficiency of Des-Lead products.
RELATED PRODUCTS
ONLINE MESSAGE
QUICK NAVIGATION
CONTACT US
WhatsApp:+8613953150321
E-mail:lucalu0321@gmail.com
Phone:+8613953150321
Factory Address: Des-Lead Production Base, No. 101 Huzhou Road, Economic and Technological Development Zone, Dongying City, Shandong Province , China
Company Address：Des-Lead 3101, Metropolitan Vanke Center, Lixia District, Jinan City, Shandong Province, China
ONLINE MESSAGE
Copyright: Shan Dong Des-Lead Advanced Materials Technology Industry Co., Ltd 300.cn Jinan2 Seo Tags Privacy Statement
