Polyurethane color -modified floor is a flat coating surface composed of polyurethane modified resin, weather -resistant fille, weather additives, weather -resistant beesein isocyanate curing agents, etc.

Scope

It is suitable for the ground with strong durability outdoor exposure to the ground. UV lighting is not easy to decompose or yellow changes. It can maintain the original luster for a long time. It is especially suitable for various outdoor courts, sports stations and other outdoor places.

Product characteristics

1. Excellent weather resistance and color preservation;
2. Good anticorrosive performance;
3. Strong decorative performance, full coating, flat and bright, friction resistance, easy to remove, impact resistance, diverse colors, beautiful and pleasing to the eye;
4. Easy to construction, curing at room temperature, and low temperature can be solid

Technical parameter

Construction process

1. The base surface should be fully dry, clean, oil -free, dust, etc., and remove the surface dust after treatment, otherwise it will affect the adhesion of the surface.
2. Protect the non -coating site with beautiful paper.
3. Before mixing, first fully stir the component A (resin), and then mix with the B of the B and mix with a weight ratio for three minutes until you get a uniform mixture. When the A and B components are mixed. Pour the material in another mixing container to ensure sufficient uniform stirring.
4. Avoid excessive stirring and bring too much air.
5. This product is not recommended to add a diluent. If the construction needs to be 3%-5%according to the environmental temperature diluent, please use the company's dedicated diluent or polyurethane grade acetate, ethyl ester and other ether on the market Estein solvents.
6. Use a drum or spray gun carefully and evenly.